DIY Cheap Home Made Signal Booster

Hey! I came up with a good solution who are suffering for low signal problem of USB Internet Modem.
I am using "Flash" 3G modem from Teletalk Bangladesh Ltd. While using I suffered  network strength time to time and place to place. It really trapped me a long while in my skype communication. Low  RSSI (Received Signal Strength Incator) confirmed  that the weak signal is the problem though I use 512Kbps bandwidth. So I slept on it for a long while to come up with a solution for the problem. searched the Internet and tried different antenna. After a long test I came up with a result which boosted my signal by 26%. I used a cookware which is under $1. It works really fine.  You can try this. Hope it will help you too.

Hello every body! Hope you all are fine. This time I am writing about how to install usb asp driver in windows 8 (32 bit or 64 bit). Those who know what is usb asp , know usb asp before you go next. Microsoft windows does not allow you to install software or driver which has not any device signature so you will find some problem to install them. In previous windows (7, XP) it was a little bit easier. Pressing "Install the Driver any way" would solve that problem however this simple portal is not manifested in WINDOWS 8. You need to follow different route to get that portal. Neophyte like me in Windows 8 (as I installed win8 just 2 weeks before) will face problem to install usb asp driver. So I searched internet a while and discovered the gateway to the portal.I hope it will help my club SSET and SSETians and others who is searching solution for the specific problem.  Follow the steps given below to get your job done.

1. Drag your mouse  to any right corner of your screen and a bar shaped menu will conjure in your screen.

2. Select the Settings options having a GEAR shaped  icon.

3. Select "CHANGE PC SETTING"

4. Select" GENERAL"

6.Select" RESTART NOW"

7.Select" TROUBLE SHOOT"

8.Select" ADVANCED OPTION"

9.Select" START UP SETTINGS "

10. Select" RESTART"

11. Select" PRESS THE NUMBER  WHERE "DISABLE DEVICE SIGNATURE" is written". eg. in my video it was 7 .

12. Congratulations! Done with Windows 8.

13. Now go to "Device manager"

14. Right click on "Usb asp"

15. Select" UPDATE DEVICE DRIVER".

16. Show the computer the containing folder "lib usb asp" in your computer.

17. You will see "usb asp"  in "Printer and FAX " menu or in "Device manager also."

18. if (every thing up to 17 is ok)

{

you are done!;

}

else (do it again :(  )

19. Happy AVR code uploading using usb asp!!!!!!!!!!!!!

The YOUTUBE link is given below:

http://youtu.be/z6AxKbLXZSE

Hello this is my first post in my Blog!!!. I am Taoufikul Islam.